Toll Free (800) 448 2005

Diverters

  • Withstand pressures to
    72 psi.
  • Buna O-ring will seal rough or corroded holes.
  • Available in sizes to fit standard or oversize cooling channels
Threadless Diverting Plugs
Catalog
Number
Drill
Size
Nominal
Pipe Size
Hex
Size
Overall
Length
BTP-10 11/32 1/8 5/64 .50
BTP-10-OS 23/64 1/8 5/64 .50
BTP-20 7/16 1/4 1/8 .56
BTP-20-OS 29/64 1/4 1/8 .56
BTP-40 9/16 3/8 1/8 .62
BTP-40-OS 37/64 3/8 1/8 .62
BTP-60 11/16 1/2 1/8 .62
BTP-60-OS 45/64 1/2 1/8 .62

Download PDF

Tap-In O-Ring Plugs
Pipe Plug Diverters

New 500 Series
Pipe Plug Diverters
Catalog
Number
Nominal
Pipe Size
C'bore
Dia.
(+/- .002)
R
C'bore
Depth
(Min.)
D
Removal
Thread
Size
TIP281 1/16 .281 .312 6-32
TIP375 1/8 .375 .312 10-32
TIP500 1/4 .500 .375 1/4-20
TIP625 3/8 .625 .437 5/16-18
TIP750 1/2 .750 .500 5/16-18
TIP1000 3/4 1 .625 3/8-16
  • Eliminate expansion stresses of taper plugs.
  • NO BACKUP required.
  • Easy machining and installation - just tap in.
  • Positive O-Ring seal to 200 PSI
  • Viton Seal allows temps up to 400 F.
  • Removal thread provided.
Tap-In O-Ring
Counter Bore and counter sink waterline

Download PDF

Push-In O-Ring Plugs
Diverter Rods

  • O-Ring Plugs are used when backed up by other mold inserts, holder block, etc.
  • Available in Brass or Stainless Steel.
  • Require less space than NPT pipe plugs. Less interference in tight spaces.
  • Standard Buna O-ring provides seal to 210 F Viton O-rings and quad rings available.
Diverter Rods
Brass
Catalog
Number
Stainless
Catalog
Number
Ream
Size
R
B
(+.000)
(-.005)
Min.
Depth
D
(+.005)
(-.00)
Removal
Thread
Size
OR-281 OR-281SS .281 1/4 .250 6-32
OR-375 OR-375SS .375 5/16 .312 10-32
OR-500 OR-500SS .500 5/16 .312 10-32
OR-625 OR-625SS .625 7/16 .437 1/4-20
OR-750 OR-750SS .750 1/2 .500 1/4-20
OR-100 OR-100SS 1.000 5/8 .625 3/8-16
Push-In O-Ring

Download PDF

Diverters

About Us | Site Map | Privacy Policy | Contact Us | © 2010 Custom Mold Eng. Inc. All Rights Reserved